{"id":6156171783,"title":"Auveco # 16184 Large Flange Thin Sheet Aluminum Nutsert 5\/16\"-18 Threads. Qty 25.","handle":"auveco-16184-large-flange-thin-sheet-aluminum-nutsert-5-16-18-threads","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 0.409-0.413 in.\u003cbr\u003e\u003cstrong\u003eBarrel Height:\u003c\/strong\u003e \u003cspan itemprop=\"height\"\u003e0.750-0.765 in.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e None\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 0.665 in. -0.680 in.\u003cbr\u003e\u003cstrong\u003eFlange Thickness:\u003c\/strong\u003e 0.650 in.\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.030 in.- 0.125 in.\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 0.413 in. - 0.423 in.\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eAluminum\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e5\/16 in.-18\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed With:\u003c\/strong\u003e Pneumatic Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Large Flange system provides captive threads in materials too thin to independently support threads, or \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ewhere costly tapping operations are to be eliminated. The Large Flange fastener can be used as a rivet to join \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ematerials that will ultimately have a separate component attached.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eTo Set 8-32, 10-24 and 10-32 Large Flange Nutserts, use tool 11805 and conversion kits listed on page 163. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eLarge Flange Nutserts, 1\/4”-20, 5\/16”-18 and 3\/8”-16, require a pneumatic tool for installation. They cannot be \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eset with 11805.\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e J05654\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e","published_at":"2016-04-18T22:44:00","created_at":"2016-04-18T22:44:27","vendor":"Auveco","type":"","tags":["Ball Diameter_0.409\" - 0.413\"","Barrel Height_0.750\" - 0.765\"","Finish_None","Flange Diameter_0.665\" - 0.680\"","Flange Thickness_0.65\" Nom.","Grip Range_0.030\" - 0.125\"","Hole Size_0.413\" - 0.423\"","Material_Aluminum","Thread_5\/16\"-18","Used With_Pneumatic Tool"],"price":3285,"price_min":3285,"price_max":3285,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":true,"all_variant_ids":[19614171079],"variants":[{"id":19614171079,"product_id":6156171783,"product_handle":"auveco-16184-large-flange-thin-sheet-aluminum-nutsert-5-16-18-threads","title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"16184","requires_shipping":true,"taxable":true,"featured_image":null,"image_id":null,"available":true,"name":"Auveco # 16184 Large Flange Thin Sheet Aluminum Nutsert 5\/16\"-18 Threads. Qty 25. - Default Title","options":["Default Title"],"price":3285,"weight":85,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","inventory_in_cart":0,"inventory_remaining":-1,"incoming":false,"next_incoming_date":null,"taxable":true,"barcode":"821641161840"}],"available":true,"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/16179_f3d3c637-5184-4be8-9587-2da6db8d150d.jpg?v=1628088600"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/16179_f3d3c637-5184-4be8-9587-2da6db8d150d.jpg?v=1628088600","options":["Title"],"url":"\/products\/auveco-16184-large-flange-thin-sheet-aluminum-nutsert-5-16-18-threads"}
Auveco # 16184 Large Flange Thin Sheet Aluminum Nutsert 5/16"-18 Threads. Qty 25.
Related Products
{"id":6155972231,"title":"Auveco # 11811 1\/4\"-20 Nutsert Tool Conversion Kit. Qty 1.","handle":"auveco-11811-1-4-20-nutsert-tool-conversion-kit","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e1\/4 in.-20\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e NT-11-1\/4-20\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e","published_at":"2016-04-18T22:36:45-04:00","created_at":"2016-04-18T22:36:45-04:00","vendor":"Auveco","type":"","tags":["Insert type_Nutsert","Thread_1\/4\"-20","Used For Auveco_11805 Tool"],"price":1780,"price_min":1780,"price_max":1780,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613941191,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11811","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 11811 1\/4\"-20 Nutsert Tool Conversion Kit. Qty 1.","public_title":null,"options":["Default Title"],"price":1780,"weight":35,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641118110","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-20-nutsert-tool-conversion-kit-auveco-11811-qty-1-1.jpg?v=1628090877"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-20-nutsert-tool-conversion-kit-auveco-11811-qty-1-1.jpg?v=1628090877","options":["Title"],"media":[{"alt":"Auveco 11811 1\/4 -20 Nutsert Tool Conversion Kit Qty 1 ","id":62470422586,"position":1,"preview_image":{"aspect_ratio":0.44,"height":768,"width":338,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-20-nutsert-tool-conversion-kit-auveco-11811-qty-1-1.jpg?v=1628090877"},"aspect_ratio":0.44,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-20-nutsert-tool-conversion-kit-auveco-11811-qty-1-1.jpg?v=1628090877","width":338}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e1\/4 in.-20\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e NT-11-1\/4-20\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e"}
Auveco # 11811 1/4"-20 Nutsert Tool Conversion Kit. Qty 1.
$17.80
Product InformationQuantity: 1Insert Type: NutsertScrew Size: 1/4 in.-20Used For: 11805 ToolMade In: TaiwanOEM Cross ReferenceW&E: NT-11-1/4-20
{"id":6155972295,"title":"Auveco # 11812 1\/4\"-28 Nutsert Tool Conversion Kit. Qty 1.","handle":"auveco-11812-1-4-28-nutsert-tool-conversion-kit","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e1\/4 in.-28\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e 17-9406\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e","published_at":"2016-04-18T22:36:45-04:00","created_at":"2016-04-18T22:36:45-04:00","vendor":"Auveco","type":"","tags":["Insert type_Nutsert","Thread_1\/4\"-28","Used For Auveco_11805 Tool"],"price":1715,"price_min":1715,"price_max":1715,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613941255,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11812","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 11812 1\/4\"-28 Nutsert Tool Conversion Kit. Qty 1.","public_title":null,"options":["Default Title"],"price":1715,"weight":4,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641118127","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-28-nutsert-tool-conversion-kit-auveco-11812-qty-1-1.jpg?v=1628090877"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-28-nutsert-tool-conversion-kit-auveco-11812-qty-1-1.jpg?v=1628090877","options":["Title"],"media":[{"alt":"Auveco 11812 1\/4 -28 Nutsert Tool Conversion Kit Qty 1 ","id":62470455354,"position":1,"preview_image":{"aspect_ratio":0.44,"height":768,"width":338,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-28-nutsert-tool-conversion-kit-auveco-11812-qty-1-1.jpg?v=1628090877"},"aspect_ratio":0.44,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-1-4-28-nutsert-tool-conversion-kit-auveco-11812-qty-1-1.jpg?v=1628090877","width":338}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e1\/4 in.-28\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e 17-9406\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e"}
Auveco # 11812 1/4"-28 Nutsert Tool Conversion Kit. Qty 1.
$17.15
Product InformationQuantity: 1Insert Type: NutsertScrew Size: 1/4 in.-28Used For: 11805 ToolMade In: TaiwanOEM Cross ReferenceCar-Pak: 17-9406
{"id":6155972359,"title":"Auveco # 11813 5\/16\"-18 Nutsert Tool Conversion Kit. Qty 1.","handle":"auveco-11813-5-16-18-nutsert-tool-conversion-kit","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e5\/16 in.-18\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e NT-11-5\/16-18\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e","published_at":"2016-04-18T22:36:45-04:00","created_at":"2016-04-18T22:36:45-04:00","vendor":"Auveco","type":"","tags":["Insert type_Nutsert","Thread_5\/16\"-18","Used For Auveco_11805 Tool"],"price":1745,"price_min":1745,"price_max":1745,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613941319,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11813","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 11813 5\/16\"-18 Nutsert Tool Conversion Kit. Qty 1.","public_title":null,"options":["Default Title"],"price":1745,"weight":40,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641118134","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-18-nutsert-tool-conversion-kit-auveco-11813-qty-1-1.jpg?v=1628090879"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-18-nutsert-tool-conversion-kit-auveco-11813-qty-1-1.jpg?v=1628090879","options":["Title"],"media":[{"alt":"Auveco 11813 5\/16 -18 Nutsert Tool Conversion Kit Qty 1 ","id":62470488122,"position":1,"preview_image":{"aspect_ratio":0.44,"height":768,"width":338,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-18-nutsert-tool-conversion-kit-auveco-11813-qty-1-1.jpg?v=1628090879"},"aspect_ratio":0.44,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-18-nutsert-tool-conversion-kit-auveco-11813-qty-1-1.jpg?v=1628090879","width":338}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e5\/16 in.-18\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e NT-11-5\/16-18\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e"}
Auveco # 11813 5/16"-18 Nutsert Tool Conversion Kit. Qty 1.
$17.45
Product InformationQuantity: 1Insert Type: NutsertScrew Size: 5/16 in.-18Used For: 11805 ToolMade In: TaiwanOEM Cross ReferenceW&E: NT-11-5/16-18
{"id":6155972487,"title":"Auveco # 11814 5\/16\"-24 Nutsert Tool Conversion Kit. Qty 1.","handle":"auveco-11814-5-16-24-nutsert-tool-conversion-kit","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e5\/16 in.-24\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e 17-9407\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e","published_at":"2016-04-18T22:36:45-04:00","created_at":"2016-04-18T22:36:45-04:00","vendor":"Auveco","type":"","tags":["Insert type_Nutsert","Thread_5\/16\"-24","Used For Auveco_11805 Tool"],"price":1680,"price_min":1680,"price_max":1680,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613941447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11814","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 11814 5\/16\"-24 Nutsert Tool Conversion Kit. Qty 1.","public_title":null,"options":["Default Title"],"price":1680,"weight":45,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641118141","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-24-nutsert-tool-conversion-kit-auveco-11814-qty-1-1.jpg?v=1628090878"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-24-nutsert-tool-conversion-kit-auveco-11814-qty-1-1.jpg?v=1628090878","options":["Title"],"media":[{"alt":"Auveco 11814 5\/16 -24 Nutsert Tool Conversion Kit Qty 1 ","id":62470520890,"position":1,"preview_image":{"aspect_ratio":0.44,"height":768,"width":338,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-24-nutsert-tool-conversion-kit-auveco-11814-qty-1-1.jpg?v=1628090878"},"aspect_ratio":0.44,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-5-16-24-nutsert-tool-conversion-kit-auveco-11814-qty-1-1.jpg?v=1628090878","width":338}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e5\/16 in.-24\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e 17-9407\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e"}
Auveco # 11814 5/16"-24 Nutsert Tool Conversion Kit. Qty 1.
$16.80
Product InformationQuantity: 1Insert Type: NutsertScrew Size: 5/16 in.-24Used For: 11805 ToolMade In: TaiwanOEM Cross ReferenceCar-Pak: 17-9407
{"id":6155972679,"title":"Auveco # 11815 3\/8\"-16 Nutsert Tool Conversion Kit. Qty 1.","handle":"auveco-11815-3-8-16-nutsert-tool-conversion-kit","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e3\/8 in.-16\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e 17-9408\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e","published_at":"2016-04-18T22:36:46-04:00","created_at":"2016-04-18T22:36:46-04:00","vendor":"Auveco","type":"","tags":["Insert type_Nutsert","Thread_3\/8\"-16","Used For Auveco_11805 Tool"],"price":1740,"price_min":1740,"price_max":1740,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613941639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"11815","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 11815 3\/8\"-16 Nutsert Tool Conversion Kit. Qty 1.","public_title":null,"options":["Default Title"],"price":1740,"weight":43,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641118158","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-3-8-16-nutsert-tool-conversion-kit-auveco-11815-qty-1-1.jpg?v=1628090878"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-3-8-16-nutsert-tool-conversion-kit-auveco-11815-qty-1-1.jpg?v=1628090878","options":["Title"],"media":[{"alt":"Auveco 11815 3\/8 -16 Nutsert Tool Conversion Kit Qty 1 ","id":62470553658,"position":1,"preview_image":{"aspect_ratio":0.44,"height":768,"width":338,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-3-8-16-nutsert-tool-conversion-kit-auveco-11815-qty-1-1.jpg?v=1628090878"},"aspect_ratio":0.44,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-3-8-16-nutsert-tool-conversion-kit-auveco-11815-qty-1-1.jpg?v=1628090878","width":338}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eInsert Type:\u003c\/strong\u003e Nutsert\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003e3\/8 in.-16\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eUsed For:\u003c\/strong\u003e 11805 Tool\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e 17-9408\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e"}
Auveco # 11815 3/8"-16 Nutsert Tool Conversion Kit. Qty 1.
$17.40
Product InformationQuantity: 1Insert Type: NutsertScrew Size: 3/8 in.-16Used For: 11805 ToolMade In: TaiwanOEM Cross ReferenceCar-Pak: 17-9408
{"id":6156020935,"title":"Auveco # 12980 Metric Thin Sheet Nutsert M4-.7. Qty 50.","handle":"auveco-12980-metric-thin-sheet-nutsert-m4-7","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 1.041mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 1\/4 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 7.29mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 2.03mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 6.35mm - 6.45mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e10.41mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM4-0.7\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e J06116\u003cbr\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13140PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13140\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 5974\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:31-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_1.041mm Max.","Class (Grade)_Type 11","Drill Size_1\/4\"","Finish_Zinc","Flange Diameter_7.29mm Ref.","Grip Range_0.508mm - 2.03mm","Hole Size_6.35mm - 6.45mm","Material_Steel","Overall Length_10.41mm Max.","Thread_M4-0.7"],"price":2340,"price_min":2340,"price_max":2340,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996103,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12980","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12980 Metric Thin Sheet Nutsert M4-.7. Qty 50.","public_title":null,"options":["Default Title"],"price":2340,"weight":74,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641129802","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12980-qty-50-1.jpg?v=1628088609"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12980-qty-50-1.jpg?v=1628088609","options":["Title"],"media":[{"alt":"Auveco 12980 Metric Thin Sheet Nutsert M4- 7 Qty 50 ","id":62486642746,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12980-qty-50-1.jpg?v=1628088609"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12980-qty-50-1.jpg?v=1628088609","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 1.041mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 1\/4 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 7.29mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 2.03mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 6.35mm - 6.45mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e10.41mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM4-0.7\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e J06116\u003cbr\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13140PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13140\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 5974\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12980 Metric Thin Sheet Nutsert M4-.7. Qty 50.
$23.40
Product InformationQuantity: 50Barrel Diameter: 1.041mm Max.Class: Type 11, 3Drill Size: 1/4 in.Finish: ZincFlange Diameter: 7.29mmGrip Range: 0.508mm - 2.03mmHole Size: 6.35mm - 6.45mmMaterial: SteelOverall Length: 10.41mmScrew Size: M4-0.7Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to prov...
{"id":6156020999,"title":"Auveco # 12981 Metric Thin Sheet Nutsert M4-.7. Qty 100.","handle":"auveco-12981-metric-thin-sheet-nutsert-m4-7","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 1.041mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 1\/4 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 7.29mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 2.03mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 6.35mm - 6.45mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e10.41mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM4-0.7\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:31-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_1.041mm Max.","Class (Grade)_Type 11","Drill Size_1\/4\"","Finish_Zinc","Flange Diameter_7.29mm Ref.","Grip Range_0.508mm - 2.03mm","Hole Size_6.35mm - 6.45mm","Material_Steel","Overall Length_10.41mm Max.","Thread_M4-0.7"],"price":3990,"price_min":3990,"price_max":3990,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12981","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12981 Metric Thin Sheet Nutsert M4-.7. Qty 100.","public_title":null,"options":["Default Title"],"price":3990,"weight":134,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641129819","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12981-qty-100-1.jpg?v=1628088610"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12981-qty-100-1.jpg?v=1628088610","options":["Title"],"media":[{"alt":"Auveco 12981 Metric Thin Sheet Nutsert M4- 7 Qty 100 ","id":62486675514,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12981-qty-100-1.jpg?v=1628088610"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m4-7-auveco-12981-qty-100-1.jpg?v=1628088610","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 1.041mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 1\/4 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 7.29mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 2.03mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 6.35mm - 6.45mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e10.41mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM4-0.7\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12981 Metric Thin Sheet Nutsert M4-.7. Qty 100.
$39.90
Product InformationQuantity: 100Barrel Diameter: 1.041mm Max.Class: Type 11, 3Drill Size: 1/4 in.Finish: ZincFlange Diameter: 7.29mmGrip Range: 0.508mm - 2.03mmHole Size: 6.35mm - 6.45mmMaterial: SteelOverall Length: 10.41mmScrew Size: M4-0.7Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to pro...
{"id":6156021127,"title":"Auveco # 12982 Metric Thin Sheet Nutsert M5-.8. Qty 50.","handle":"auveco-12982-metric-thin-sheet-nutsert-m5-8","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 7.11mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 9\/32 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 8.13mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 3.30mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7.14mm - 7.24mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e11.81mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM5-0.80\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13141PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13141\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 3149\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:31-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_7.11mm Max.","Class (Grade)_Type 11","Drill Size_9\/32\"","Finish_Zinc","Flange Diameter_8.13mm Ref.","Grip Range_0.508mm - 3.30mm","Hole Size_7.14mm - 7.24mm","Material_Steel","Overall Length_11.81mm Max.","Thread_M5-0.8"],"price":1890,"price_min":1890,"price_max":1890,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996295,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12982","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12982 Metric Thin Sheet Nutsert M5-.8. Qty 50.","public_title":null,"options":["Default Title"],"price":1890,"weight":83,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641129826","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m5-8-auveco-12982-qty-50-1.jpg?v=1628088612"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m5-8-auveco-12982-qty-50-1.jpg?v=1628088612","options":["Title"],"media":[{"alt":"Auveco 12982 Metric Thin Sheet Nutsert M5- 8 Qty 50 ","id":62486708282,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m5-8-auveco-12982-qty-50-1.jpg?v=1628088612"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m5-8-auveco-12982-qty-50-1.jpg?v=1628088612","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 50\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 7.11mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 9\/32 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 8.13mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 3.30mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7.14mm - 7.24mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e11.81mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM5-0.80\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13141PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13141\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 3149\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12982 Metric Thin Sheet Nutsert M5-.8. Qty 50.
$18.90
Product InformationQuantity: 50Barrel Diameter: 7.11mm Max.Class: Type 11, 3Drill Size: 9/32 in.Finish: ZincFlange Diameter: 8.13mmGrip Range: 0.508mm - 3.30mmHole Size: 7.14mm - 7.24mmMaterial: SteelOverall Length: 11.81mmScrew Size: M5-0.80Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to pro...
{"id":6156021191,"title":"Auveco # 12983 Metric Thin Sheet Nutsert M5-.8. Qty 100.","handle":"auveco-12983-metric-thin-sheet-nutsert-m5-8","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 7.11mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 9\/32 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 8.13mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 3.30mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7.14mm - 7.24mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e11.81mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM5-0.80\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:31-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_7.11mm Max.","Class (Grade)_Type 11","Drill Size_9\/32\"","Finish_Zinc","Flange Diameter_8.13mm Ref.","Grip Range_0.508mm - 3.30mm","Hole Size_7.14mm - 7.24mm","Material_Steel","Overall Length_11.81mm Max.","Thread_M5-0.8"],"price":2870,"price_min":2870,"price_max":2870,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996359,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12983","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12983 Metric Thin Sheet Nutsert M5-.8. Qty 100.","public_title":null,"options":["Default Title"],"price":2870,"weight":83,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641129833","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_e5ae87d6-3b42-47ca-8def-2636ac21e18e.jpg?v=1628088613"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_e5ae87d6-3b42-47ca-8def-2636ac21e18e.jpg?v=1628088613","options":["Title"],"media":[{"alt":"Auveco 12983 Metric Thin Sheet Nutsert M5- 8 Qty 100 ","id":62486741050,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_e5ae87d6-3b42-47ca-8def-2636ac21e18e.jpg?v=1628088613"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_e5ae87d6-3b42-47ca-8def-2636ac21e18e.jpg?v=1628088613","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 7.11mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 9\/32 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 8.13mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.508mm - 3.30mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 7.14mm - 7.24mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e11.81mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM5-0.80\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12983 Metric Thin Sheet Nutsert M5-.8. Qty 100.
$28.70
Product InformationQuantity: 100Barrel Diameter: 7.11mm Max.Class: Type 11, 3Drill Size: 9/32 in.Finish: ZincFlange Diameter: 8.13mmGrip Range: 0.508mm - 3.30mmHole Size: 7.14mm - 7.24mmMaterial: SteelOverall Length: 11.81mmScrew Size: M5-0.80Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to pr...
{"id":6156021319,"title":"Auveco # 12984 Metric Thin Sheet Nutsert M6-1.0. Qty 25.","handle":"auveco-12984-metric-thin-sheet-nutsert-m6-1-0","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 9.50mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 3\/8 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 10.54mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.762mm - 4.19mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 9.53mm - 9.63mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e15.49mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM6-1.0\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e J06118\u003cbr\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13142PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13142\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 5942\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:32-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_9.50mm Max.","Class (Grade)_Type 11","Drill Size_3\/8\"","Finish_Zinc","Flange Diameter_10.54mm Ref.","Grip Range_0.762mm - 4.19mm","Hole Size_9.53mm - 9.63mm","Material_Steel","Overall Length_15.49mm Max.","Thread_M6-1.0"],"price":1450,"price_min":1450,"price_max":1450,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996487,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12984","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12984 Metric Thin Sheet Nutsert M6-1.0. Qty 25.","public_title":null,"options":["Default Title"],"price":1450,"weight":103,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641129840","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m6-1-0-auveco-12984-qty-25-1.jpg?v=1628088615"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m6-1-0-auveco-12984-qty-25-1.jpg?v=1628088615","options":["Title"],"media":[{"alt":"Auveco 12984 Metric Thin Sheet Nutsert M6-1 0 Qty 25 ","id":62486773818,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m6-1-0-auveco-12984-qty-25-1.jpg?v=1628088615"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/nuts-metric-thin-sheet-nutsert-m6-1-0-auveco-12984-qty-25-1.jpg?v=1628088615","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 9.50mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 3\/8 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 10.54mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.762mm - 4.19mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 9.53mm - 9.63mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e15.49mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM6-1.0\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eCar-Pak:\u003c\/strong\u003e J06118\u003cbr\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13142PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13142\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 5942\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12984 Metric Thin Sheet Nutsert M6-1.0. Qty 25.
$14.50
Product InformationQuantity: 25Barrel Diameter: 9.50mm Max.Class: Type 11, 3Drill Size: 3/8 in.Finish: ZincFlange Diameter: 10.54mmGrip Range: 0.762mm - 4.19mmHole Size: 9.53mm - 9.63mmMaterial: SteelOverall Length: 15.49mmScrew Size: M6-1.0Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to prov...
{"id":6156021383,"title":"Auveco # 12985 Metric Thin Sheet Nutsert M6-1.0. Qty 100.","handle":"auveco-12985-metric-thin-sheet-nutsert-m6-1-0","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 9.50mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 3\/8 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 10.54mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.762mm - 4.19mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 9.53mm - 9.63mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e15.49mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM6-1.0\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:32-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_9.50mm Max.","Class (Grade)_Type 11","Drill Size_3\/8\"","Finish_Zinc","Flange Diameter_10.54mm Ref.","Grip Range_0.762mm - 4.19mm","Hole Size_9.53mm - 9.63mm","Material_Steel","Overall Length_15.49mm Max.","Thread_M6-1.0"],"price":4915,"price_min":4915,"price_max":4915,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996551,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12985","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12985 Metric Thin Sheet Nutsert M6-1.0. Qty 100.","public_title":null,"options":["Default Title"],"price":4915,"weight":371,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"821641129857","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_2f534fb4-52bd-46d6-a542-88460707d289.jpg?v=1628088615"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_2f534fb4-52bd-46d6-a542-88460707d289.jpg?v=1628088615","options":["Title"],"media":[{"alt":"Auveco 12985 Metric Thin Sheet Nutsert M6-1 0 Qty 100 ","id":62486806586,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_2f534fb4-52bd-46d6-a542-88460707d289.jpg?v=1628088615"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_2f534fb4-52bd-46d6-a542-88460707d289.jpg?v=1628088615","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 100\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 9.50mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 3\/8 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 10.54mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 0.762mm - 4.19mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 9.53mm - 9.63mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e15.49mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM6-1.0\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12985 Metric Thin Sheet Nutsert M6-1.0. Qty 100.
$49.15
Product InformationQuantity: 100Barrel Diameter: 9.50mm Max.Class: Type 11, 3Drill Size: 3/8 in.Finish: ZincFlange Diameter: 10.54mmGrip Range: 0.762mm - 4.19mmHole Size: 9.53mm - 9.63mmMaterial: SteelOverall Length: 15.49mmScrew Size: M6-1.0Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to pro...
{"id":6156021447,"title":"Auveco # 12986 Metric Thin Sheet Nutsert M8-1.25. Qty 25.","handle":"auveco-12986-metric-thin-sheet-nutsert-m8-1-25","description":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 12.67mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 1\/2 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 13.72mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 1.02mm - 5.08mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 12.71mm - 12.80mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e18.29mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM8-1.25\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eClip Lizard:\u003c\/strong\u003e 30308\u003cbr\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13143PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13143\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 5943\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov.","published_at":"2016-04-18T22:38:00-04:00","created_at":"2016-04-18T22:38:32-04:00","vendor":"Auveco","type":"","tags":["Ball Diameter_12.67mm Max.","Class (Grade)_Type 11","Drill Size_1\/2\"","Finish_Zinc","Flange Diameter_13.72mm Ref.","Grip Range_1.02mm - 5.08mm","Hole Size_12.71mm - 12.80mm","Material_Steel","Overall Length_18.29mm Max.","Thread_M8-1.25"],"price":1995,"price_min":1995,"price_max":1995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19613996615,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"12986","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Auveco # 12986 Metric Thin Sheet Nutsert M8-1.25. Qty 25.","public_title":null,"options":["Default Title"],"price":1995,"weight":873,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"821641129864","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_1566a0dc-a844-4a7a-9ce0-1cf37478daf3.jpg?v=1628088610"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_1566a0dc-a844-4a7a-9ce0-1cf37478daf3.jpg?v=1628088610","options":["Title"],"media":[{"alt":"Auveco 12986 Metric Thin Sheet Nutsert M8-1 25 Qty 25 ","id":62486839354,"position":1,"preview_image":{"aspect_ratio":1.0,"height":550,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_1566a0dc-a844-4a7a-9ce0-1cf37478daf3.jpg?v=1628088610"},"aspect_ratio":1.0,"height":550,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1255\/8379\/products\/12984_ht_1566a0dc-a844-4a7a-9ce0-1cf37478daf3.jpg?v=1628088610","width":550}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eProduct Information\u003c\/h2\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 25\u003cbr\u003e\u003cstrong\u003eBarrel Diameter:\u003c\/strong\u003e 12.67mm Max.\u003cbr\u003e\u003cstrong\u003eClass:\u003c\/strong\u003e Type 11, 3\u003cbr\u003e\u003cstrong\u003eDrill Size:\u003c\/strong\u003e 1\/2 in.\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc\u003cbr\u003e\u003cstrong\u003eFlange Diameter:\u003c\/strong\u003e 13.72mm\u003cbr\u003e\u003cstrong\u003eGrip Range:\u003c\/strong\u003e 1.02mm - 5.08mm\u003cbr\u003e\u003cstrong\u003eHole Size:\u003c\/strong\u003e 12.71mm - 12.80mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e \u003cspan itemprop=\"material\"\u003eSteel\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eOverall Length:\u003c\/strong\u003e \u003cspan itemprop=\"length\"\u003e18.29mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eScrew Size:\u003c\/strong\u003e \u003cspan itemprop=\"size\"\u003eM8-1.25\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMade In:\u003c\/strong\u003e \u003cspan itemprop=\"countryOfAssembly\"\u003eTaiwan\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eThreaded Inserts for Thin Material: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eone side of the work, in materials generally too thin to support threads. Its performance has been proven in \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eplastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eunder extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003einsuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003econsistent rates using unskilled labor.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eHow it Works: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eThe Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet. \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003eThe tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003etakes only a few seconds and can be performed by anyone.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eStrength Tests: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003eTorque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface, \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethe TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ethreads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely \u003c\/span\u003e\u003cspan style=\"font-family: swiss721bt-roman; font-size: 10pt;\"\u003ehigh tensile bolt is used.\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-bold;\"\u003eSteel: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; font-family: swiss721bt-roman;\"\u003e1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate\u003c\/span\u003e\u003c\/p\u003e\u003cp class=\"msonormal\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-bold;\"\u003eAluminum: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 10pt; line-height: 14.2667px; font-family: swiss721bt-roman;\"\u003eAluminum Alloy 5056, Plain Finish, Metric Class 6H, U.S. Class 2B\u003c\/span\u003e\u003c\/p\u003e\u003ch2\u003eOEM Cross Reference\u003c\/h2\u003e\u003cspan itemprop=\"isSimilarTo\"\u003e\u003cstrong\u003eClip Lizard:\u003c\/strong\u003e 30308\u003cbr\u003e\u003cstrong\u003eDisco:\u003c\/strong\u003e 13143PK\u003cbr\u003e\u003cstrong\u003eShop Supplies:\u003c\/strong\u003e FN13143\u003cbr\u003e\u003cstrong\u003eW\u0026amp;E:\u003c\/strong\u003e 5943\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ch4\u003eCalifornia Prop 65\u003c\/h4\u003eWARNING: This product can expose you to chemicals including Chromium, which is known to the State of California to cause Reproductive Risk \u0026amp; Cancer. For more information go to www.P65Warnings.ca.gov."}
Auveco # 12986 Metric Thin Sheet Nutsert M8-1.25. Qty 25.
$19.95
Product InformationQuantity: 25Barrel Diameter: 12.67mm Max.Class: Type 11, 3Drill Size: 1/2 in.Finish: ZincFlange Diameter: 13.72mmGrip Range: 1.02mm - 5.08mmHole Size: 12.71mm - 12.80mmMaterial: SteelOverall Length: 18.29mmScrew Size: M8-1.25Made In: TaiwanThreaded Inserts for Thin Material: The Auveco Thin Sheet Nutsert has been designed to p...
